Festool Cordless drill T 15+3 (non-set) in T-LOC Systainer 20% off Reconditioned 564227

The innovative Festool FastFix chuck system allows you to use any of the five Festool specialty chucks with your Festool T 15+3, delivering the versatility that you need to tackle virtually any job. This basic setup includes the Centrotec chuck, which reduces the drill's weight and footprint, and works with the full array of Festool Centrotec drill and driver bits. The four additional chucks that are available for use with this system include an eccentric chuck designed for working in corners and against adjoining edges and a right-angle chuck allows you to work at a 90-angle to the drive motor, opening up spaces that used to be impossible to access with a power drill. Both of these chucks swivel a full 360 degrees and feature 16 locking positions for extra versatility. A depth-stop chuck and a keyless, drill chuck that can be used with the T 15+3, and driver bits up to 1/2-inch in diameter are also available. Plus, you can also use standard hex driver bits in the drill with no chuck attached. And, regardless of which chuck you're working with, you can keep your most-used bits nearby with onboard magnetic storage for up to four 1-inch driver bits. The well-balanced T 15+3 weighs in at just 3 pounds and 4.9 ounces, and offers a soft, rubberized ergonomic grip--a setup that ensures comfortable prolonged use and reduced operator fatigue. You can quickly switch between driving and removing screws with the forward/reverse switch, which is conveniently located near the trigger. On the top of the T 15+3, you'll find the drill/drive mode selector and the speed selector. When in drill mode, the T 15+3 automatically overrides the clutch to make sure you get maximum power and torque. When in drive mode, the clutch re-engages, and switching between drill and drive modes won't cause you to lose your clutch setting. The speed selector offers two settings and doesn't change the torque produced by the motor. When it's used in conjunction with the clutch setting, you can achieve true application-specific performance. The T 15+3 features a second-generation, brushless motor that's designed to offer improved efficiency and reliability, an well as a longer service life. This powerful tool offers maximum torque of 354 inch-pounds in steel and maximum torque of 238 inch-pounds in wood to help you power through tough jobs. Its design also includes strategically placed ventilation ports that reduce the chances of premature wear due to overheating, and MMC (multi-material control) electronics, which contribute to greater versatility and durability. A key part of this system is the T 15+3's sophisticated electronic clutch. Thanks to an audible tone, you'll always know when the clutch engages. And when the clutch is dialed to a setting below 10, the speed of the drill is also reduced automatically. Compared with mechanical clutches, this design results in less wear on the motor and other parts, and saves you money that would be spent on repairs or replacements. The two Festool T+3 lithium-ion batteries included with this set are cell balanced, which means that battery cells are selected and matched to offer optimal charge and discharge cycles for improved power delivery. These batteries are lighter than other batteries for improved overall handling, and they can be fully charged in just 70 minutes using the included charger, so you don't lose valuable work time waiting for recharges. The intelligent microprocessor-controlled battery charger uses pulse-charging technology, which is designed to protect your batteries from damage and prolong their life. It features LEDs that let you know when your batteries are ready to go, and is compatible with Festool NiCD and NiMH batteries.