Festool Cordless drill T 12+3 (non-set) in T-LOC Systainer 30% off Reconditioned 564216

Five Tools in One with the FastFix Chuck System. The innovative Festool FastFix chuck system allows you to use any of the five Festool specialty chucks with your T 12+3, delivering the versatility that you need to tackle virtually any job, and four of the five chucks are included with this set (the depth-stop chuck is sold separately). The eccentric chuck is designed for working in corners and against adjoining edges, while the right-angle chuck allows you to work at a 90-angle to the drive motor, opening up spaces that used to be impossible to access with a power drill. Both of these chucks swivel a full 360 degrees and feature 16 locking positions for extra versatility. The smaller, lighter Centrotec chuck reduces the T 12+3's weight and footprint and works with the full array of Festool Centrotec drill and driver bits, while the keyless drill chuck can be used with drill and driver bits up to 1/2-inch in diameter. You can also use standard hex driver bits in the drill with no chuck attached. And, regardless of which chuck you're working with, you can keep your most-used bits nearby with onboard magnetic storage for up to four 1-inch driver bits. Ergonomic Body for Extended Use. The well-balanced T 12+3 weighs in at just 3 pounds and 1.4 ounces, and offers a soft, rubberized ergonomic grip--a setup that ensures comfortable prolonged use and reduced operator fatigue. Conveniently Placed Direction, Mode, and Speed Selectors. You can quickly switch between driving and removing screws with the forward/reverse switch, which is conveniently located near the trigger. On the top of the T 12+3, you'll find the drill/drive-mode selector and the speed selector. When in drill mode, the T 12+3 automatically overrides the clutch to make sure you get maximum power and torque. When in drive mode, the clutch re-engages, and switching between drill and drive modes won't cause you to lose your clutch setting. The speed selector offers two settings and doesn't change the torque produced by the motor. When it's used in conjunction with the clutch setting, you can achieve true application-specific performance. Robust Design with MMC Electronics and Brushless Motor. The T 12+3 features a second-generation brushless motor that's designed to offer improved efficiency and reliability, as well as a longer service life. This powerful tool offers maximum torque of 300 inch-pounds in steel and maximum torque of 220 inch-pounds in wood to help you power through tough jobs. Its design also includes strategically placed ventilation ports that reduce the chances of premature wear due to overheating, and MMC (multi-material control) electronics, which contribute to greater versatility and durability. A key part of this system is the drill's sophisticated electronic clutch. Thanks to an audible tone, you'll always know when the clutch engages. And when the clutch is dialed to a setting below 10, the speed of the drill is also reduced automatically. Compared with mechanical clutches, this design results in less wear on the motor and other parts, and saves you money that would be spent on repairs or replacements. Lithium-Ion Batteries and Battery Charger. The two Festool T+3 lithium-ion batteries included with this set are cell balanced, which means that battery cells are selected and matched to offer optimal charge and discharge cycles for improved power delivery. These batteries are lighter than other batteries for improved overall handling, and they can be fully charged in just 70 minutes using the included charger, so you don't lose valuable work time waiting for recharges. The intelligent microprocessor-controlled battery charger uses pulse-charging technology, which is designed to protect your batteries from damage and prolong their life. It features LEDs that let you know when your batteries are ready to go, and it's compatible with Festool NiCD and NiMH batteries.