Delta 15in. Production Drill Presses 15-263
$0.00
In Stock
SKU
15-263
For nearly one-hundred years Delta Power Equipment has devoted intense attention to designing and manufacturing some of the most brilliant woodworking equipment in the industry. For every one of those one hundred years, Delta has also worked tirelessly to ensure that their equipment will not only stand the test of time, but also stand-up to the rigors of industrial use and woodshop life. As a result, Delta machinery represents some of the most elite woodworking equipment in the industry.
Efficient variable-speed drive lets you select any spindle speed instantly while machine is running. A self-locking cam, plus a in.snubberin. feature, hold speed settings constant under all load conditions. Proper belt tension is automatically maintained for full power transmission.
Extra-large spindle bearings in.6 PLUS 6in. and in.VS6in. spindle and spindle pulley are supported by four over-sized, pre-loaded, lubrcated-for-life ball bearings. Massive quill is a full 2in. diameter. in.VS6in. has the same excellent construction, PLUS an extra bearing below the spindle pulley. This fine combination of features assures freedom from chatter, long, maintenance-free life and maximum pressure at the drill point.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drillingjob on any material- 450 to 4700 rpm with a 1725 rpm motor and 300 to 3100 with an 1140 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring loaded, rubber-tipped plunger that quickly restores correct belt tension.
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling... PLUS, the extra stroke required for clearing jigs and fixtures.
Six speeds offer unbelievably wide range of speeds with a low-cost 1725 rpm motor- 425, 600, 1100, 2050, 3900 and 5500 rpm- 11.8 to 1 speed ratio. You can choose an extra-slow speed for drilling very hard materials... an extra-fast speed for working soft materials... or an optimum speed for any size bit material.
Extra-large spindle bearings in.6 PLUS 6in. and in.VS6in. spindle and spindle pulley are supported by four over-sized, pre-loaded, lubrcated-for-life ball bearings. Massive quill is a full 2in. diameter. in.VS6in. has the same excellent construction, PLUS an extra bearing below the spindle pulley. This fine combination of features assures freedom from chatter, long, maintenance-free life and maximum pressure at the drill point.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drillingjob on any material- 450 to 4700 rpm with a 1725 rpm motor and 300 to 3100 with an 1140 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring loaded, rubber-tipped plunger that quickly restores correct belt tension.
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling... PLUS, the extra stroke required for clearing jigs and fixtures.
Six speeds offer unbelievably wide range of speeds with a low-cost 1725 rpm motor- 425, 600, 1100, 2050, 3900 and 5500 rpm- 11.8 to 1 speed ratio. You can choose an extra-slow speed for drilling very hard materials... an extra-fast speed for working soft materials... or an optimum speed for any size bit material.
| Buy Together | No |
|---|
Write Your Own Review
Compatibility